A leather strop won’t sharpen a dull knife, and anyone who tells you it will is selling something. What it does is finish the job your stone or sharpener started. Every sharpening leaves a burr, a thin wire of steel that folds over along the edge. It feels sharp until the first few cuts bend it flat. A few light passes on leather, spine first, pull that burr off and polish the edge so it stays keen longer.
The strop you buy matters more than people think. A short pocket block can’t cover a 10-inch chef’s knife in one sweep, a soft hanging razor strop sags under a knife and rounds the edge, and a strop with no flat, firm base will rock under pressure. For knives, you want firm leather glued to a flat paddle or block, long enough for your longest blade, plus a fine compound.
Start with the BeaverCraft LS6P1: a 14-inch double-sided paddle that handles kitchen and pocket knives alike. If you want a full set of compounds to work through, the Bacher kit is the one to get.
My Top 6 Leather Strop Picks
A long, two-sided paddle with an ash handle and compound included. The length is what sets it apart: you can strop a chef’s knife in one smooth pass.
Thick bark-tanned cowhide on a beech paddle, with four compounds from medium to ultra fine. The kit for anyone who wants to step down through grits.
A flat block that sits still on the bench, with green compound and an angle guide. The guide is a real help while you’re learning to hold an angle.
Made to finish edges from HORL’s rolling sharpeners, and fine after a whetstone too. Vegetable-tanned leather, finished by hand in the Black Forest.
A small two-sided strop that fits in a pack or tackle box. Good for touching up pocket and hunting knives away from home.
Leather Strops Compared
| Strop | Style | Length | Compound | Extras | Best for |
|---|---|---|---|---|---|
| BeaverCraft LS6P1 | Double-sided paddle | 14″ | Included | Ash handle | Kitchen and pocket knives |
| Bacher | Double-sided paddle | 12.6″ | 4 grits (2000 to 12000) + balm | 5 applicators | Step-by-step polishing |
| SHARPAL 204N | Bench block | 8″ x 3″ | Green, 1 to 2 micron | Angle guide, non-slip base | Learning the angle |
| HORL | Leather strop | Not listed | None | Fits HORL system | Rolling sharpener users |
| Hutsuls Pocket | Pocket strop | Pocket size | Included | Rough and smooth side | Field touch-ups |
| BeaverCraft LS5P1 | Profiled paddle | Paddle | Included | Sandpaper side | Gouges, hook knives |
1. BeaverCraft LS6P1 Double-Sided Leather Strop, 14 Inch: Best Overall
Who it’s for: anyone who sharpens a mix of kitchen, pocket and outdoor knives and wants one strop for all of them.
Length is the reason this one leads. Most budget strops are 8 inches or less, which works for a pocket knife but makes you shuffle a chef’s knife across the leather in pieces. At 14 inches, the LS6P1 lets you sweep a long blade from heel to tip in one controlled pass, which is how you get an even polish along the whole edge.
It’s double-sided, so you can load one side with compound and keep the other bare for a final few passes. The handle is ash, comfortable whether you hold the strop in the air or brace its end on a table. BeaverCraft makes its strops in Europe and is best known among wood carvers, who strop more often than almost anyone.
My one reservation is the handle. A paddle you hold is less stable than a block on a bench, so beginners should rest the end on a table and keep their pressure light. The compound bar is basic, so I’d add a better fine green compound later.
Key specs
- Style: double-sided leather paddle, 14 inches
- Handle: ash wood
- Includes: polishing compound, e-books on sharpening carving tools
- Made in Europe (BeaverCraft)
Pros
- Long enough for chef’s knives
- Two sides: compound and bare leather
- Popular, affordable starter strop
Cons
- Handheld paddle wobbles more than a block
- Basic compound
My verdict: the strop I’d tell most people to buy, especially if they own kitchen knives. If you only strop pocket knives at a bench, the SHARPAL block is easier to keep steady.
2. Bacher Leather Strop, 12.6 Inch, with 4 Compounds and Balm: Best Compound Kit
Who it’s for: people who like to finish an edge in stages and want everything in one box.
Most strops come with one bar of compound. The Bacher kit comes with four, from Red 2000 (medium) through White 5000 and Green 8000 to Black 12000 (ultra fine), plus a balm to condition the leather and five wooden applicators. That lets you step down through grits the way you would on stones, instead of jumping straight to the finest paste.
The leather is worth a mention too. It’s full-grain cowhide, bark-tanned and handmade in Poland, and left a full 3 mm thick on an FSC-certified beech paddle. Thick, firm leather gives a little under the blade without letting the edge sink in and round over.
Keep in mind that compound colors aren’t standard between brands: this kit’s green is not the same grit as another brand’s green, so go by the number. With four pastes and only two sides, you’ll also need to decide which two to keep loaded. Most people will put a medium and a fine on and keep the others for later.
Key specs
- Style: double-sided paddle, 12.6 inches
- Leather: 3 mm full-grain, bark-tanned cowhide, handmade in Poland
- Paddle: FSC beech
- Compounds: 2000, 5000, 8000, 12000 (7 g each) + leather balm
- Includes: 5 applicators, gift box, e-book guide
Pros
- Four grits to work through
- Thick, firm leather
- Nice gift box presentation
Cons
- Only two sides for four compounds
- Shorter than the BeaverCraft for long kitchen knives
My verdict: the best kit if you enjoy the polishing part of sharpening, and a great gift for someone who already owns stones. If you just want one fine compound and a strop, the BeaverCraft is simpler.
3. SHARPAL 204N Leather Strop Block, 8 x 3 Inch: Best for Beginners
Who it’s for: first-time stroppers who want a strop that stays put and helps them find the right angle.
The biggest mistake new stroppers make is raising the spine too high, which rounds the edge instead of polishing it. The SHARPAL 204N tackles that with an angle guide with four settings (14, 17, 20 and 25 degrees) so you can see the angle before you start. Once you’ve felt it a few times, you won’t need the guide.
It’s a block rather than a paddle: genuine cowhide on a wooden base with anti-slip mats underneath, so it stays on the counter while you work. The included green compound has 1 to 2 micron particles, which SHARPAL compares to roughly 10,000 to 14,000 grit, a good single finishing compound for most knives.
The trade-off is size. At 8 by 3 inches it’s fine for pocket and paring knives, but a long chef’s knife has to be stropped in sections. It’s also one-sided.
Key specs
- Style: leather block on wood base, 8 x 3 inches
- Leather: genuine cowhide
- Compound: green, 1 to 2 micron, 2 oz
- Angle guide: 14, 17, 20, 25 degrees
- Non-slip base; 3-year SHARPAL support
Pros
- Angle guide helps beginners
- Stable on a bench
- Good fine compound included
Cons
- Short for long kitchen knives
- Single-sided
My verdict: the easiest strop to learn on, and a good match for pocket knives. Kitchen knife owners should pick the BeaverCraft’s longer leather instead.
4. HORL Leather Strop, Handmade in Germany: Best for Rolling Sharpener Owners
Who it’s for: people who sharpen with a HORL rolling sharpener and want a strop made for the same system.
HORL is a German family business founded in 2016, best known for its rolling sharpeners. This strop is its finishing step: vegetable-tanned cowhide, finished by hand in the Black Forest, and designed to sit with HORL3, HORL3 Cruise, HORL3 Pro and HORL 2 sharpeners. It works as a regular strop after a whetstone too.
The leather has a fine, smooth surface, and HORL’s instructions are the right ones: light pressure, and always swipe toward the spine. The company even notes that a slight scratchy feel during the first strokes means there’s still grinding residue on the edge, which is a good tip for beginners.
My reservations are cost and compound. It costs more than most strops here and comes without compound, so on its own it’s a bare leather strop. Add a fine compound if you want more polishing action.
Key specs
- Leather: vegetable-tanned cowhide
- Made in Germany, hand-finished in the Black Forest
- Fits: HORL3, HORL3 Cruise, HORL3 Pro, HORL 2
- Compound: not included
Pros
- Fine, high-quality leather
- Matches the HORL system
- Works after a whetstone too
Cons
- Costs more than the other strops here
- No compound included
My verdict: the natural partner for a HORL sharpener. If you don’t own one, the BeaverCraft and Bacher strops give you more for the money.
5. Hutsuls Pocket Knife Strop Kit: Best Pocket Strop
Who it’s for: hunters, campers and anglers who want to touch up an edge away from home.
A full-size strop doesn’t belong in a backpack. This Hutsuls kit is a small, double-sided strop with a rough side and a smooth side of genuine leather, plus a bar of compound and a step-by-step guide. It’s sized to ride in a pack, glovebox or tackle box.
In the field, stropping is often all a pocket or hunting knife needs between real sharpenings. A few passes after cleaning a fish or cutting cord bring back the bite that a slightly rolled edge loses. Hutsuls also suggests it for axes and broadheads.
The small size is also its limit. It’s too short for kitchen knives, and holding a small strop steady takes care, so brace it on a log, a tailgate or your knee. The brand doesn’t give exact dimensions.
Key specs
- Style: pocket-size, double-sided leather strop
- Sides: rough and smooth genuine leather
- Includes: honing compound, how-to guide
- Use: knives, axes, broadheads, bushcraft tools
Pros
- Small enough for a pack
- Two leather textures
- Very affordable
Cons
- Too short for kitchen knives
- Exact size not listed
My verdict: a great second strop for the field. Keep a full-size one at home for real stropping sessions.
6. BeaverCraft LS5P1 Wood Carving Strop: Best for Carving Tools
Who it’s for: spoon carvers and whittlers who need to strop curved tools as well as straight knives.
A flat strop can’t reach the inside of a gouge or a hook knife. The LS5P1 has shaped profiles along the paddle so you can strop the inside curve of those tools, plus a flat area for your sloyd or whittling knife. One side is leather for polishing and the other takes sandpaper for light sharpening, and the kit includes a bar of compound and two sandpaper sheets.
Carvers strop more than anyone else, often every 20 to 30 minutes while working, because a carving edge has to stay razor keen to cut clean across the grain. BeaverCraft makes its strops in Ukraine and sells to a lot of carvers, and this is the strop it designed for spoon work.
It’s a specialist tool, though. The paddle is not long enough for kitchen knives, and the profiles are no use to someone who only owns straight blades.
Key specs
- Style: profiled paddle strop for carving tools
- Sides: leather (polishing) and sandpaper (light sharpening)
- Includes: polishing compound, 2 sandpaper sheets
- Made in Ukraine
Pros
- Reaches inside gouges and hook knives
- Sandpaper side for light sharpening
- Complete kit for carvers
Cons
- Not for kitchen knives
- Only useful if you carve
My verdict: the strop a carver needs alongside a flat one. Everyone else should buy the LS6P1.
What to Look for in a Leather Strop
Length that covers your longest blade
Choose a strop at least as long as your longest knife’s edge, or close to it. You want to sweep from heel to tip in one pass so the whole edge gets the same polish. About 12 inches or more suits kitchen knives; 8 inches is plenty for pocket knives.
Firm leather on a flat base
Firm leather glued to a flat paddle or block is right for knives. Soft or loose leather lets the edge sink and rounds it over, which is why hanging razor strops are a poor choice for knives. Thick, firm leather (like the Bacher’s 3 mm) gives just a little.
A compound you can identify
A fine compound speeds up stropping and gives a brighter edge, but go by grit or micron, not color. Colors aren’t standardized between brands. One fine green (about 1 to 2 microns) is all most people need; very hard steels respond better to diamond compound, and ceramic blades need diamond only (my guide on how to sharpen a ceramic knife explains why). Use one compound per leather surface so coarse grit doesn’t contaminate the fine side.
Paddle or block
Paddles are easy to hold and store, and you can strop in the air or brace them on a table. Blocks sit flat on the bench, which is steadier for beginners. Both work if you keep the pressure light.
Rough side or smooth side
Many double-sided strops have a rough (suede) side and a smooth side. The rough side holds compound well; the smooth side is good bare for the final passes. Neither is wrong; just keep each side for one job.
How to Use a Leather Strop
Lay the blade flat on the leather at about your sharpening angle, then pull it backward, spine first, with light pressure. Sweep from heel to tip as you go so the whole edge touches the leather. Lift the knife off at the end of each stroke, flip it, and do the other side. Ten to twenty strokes per side is plenty after sharpening, then finish with a few single, alternating passes.
Never lead with the edge, or you’ll cut into the leather. Hard Japanese blades need the lightest touch of all; my guide on how to sharpen Shun knives shows the whole routine for thin, hard edges. And don’t expect a strop to fix a truly dull knife: if the edge still won’t bite after about thirty strokes, go back to the stone. My full step-by-step guide on how to strop a knife covers angle, pressure and the mistakes that round an edge.
A strop works best paired with a good sharpener. If you’re still choosing one, my best knife sharpener guide covers whetstones, guided systems and electric options.
FAQ
Is a leather strop worth it?
Yes, if you sharpen your own knives. A strop removes the burr left by sharpening and polishes the edge, so it cuts more cleanly and stays sharp longer. It’s one of the cheapest upgrades to any sharpening routine.
Do you need compound on a leather strop?
No, but compound helps. Bare leather can remove a burr and realign an edge; a fine compound adds a little abrasive, so the strop polishes faster and gives a brighter, keener edge.
Which side of a leather strop do you use?
Use the rough (suede) side with compound and the smooth side bare for the final passes. If both sides are smooth, load one with compound and leave the other plain.
What angle should you strop a knife at?
Strop at about the same angle you sharpen at, or a touch higher. Lifting the spine well above the edge bevel rounds the edge, which is the most common stropping mistake. The SHARPAL angle guide helps while you learn.
How often should you strop a knife?
Strop after every sharpening, and give the edge a few light passes whenever it starts to feel less keen. Kitchen knives in daily use benefit from a quick stropping once a week or so.
Can you strop a serrated knife?
Only the flat back of a serrated blade. Strop that side lightly to remove the burr after sharpening, but leave the scalloped side to a tapered rod.
Final Verdict
The BeaverCraft LS6P1 is the leather strop I’d recommend to most people, because it’s long enough for kitchen knives and still easy to use on a pocket knife. Choose the Bacher kit if you want four compounds and thick leather, or the SHARPAL block if you’re learning and want a strop that sits still with an angle guide. Carvers should add the LS5P1 for gouges and hook knives.
Not sure your edge needs work? My guide on how to tell if a knife is sharp enough has simple tests, and my pocket knife sharpening guide shows the steps before the strop.

Gary Portman founded knivesadvice.com in 2019. He learned to cook in his family’s kitchen as a kid and has used kitchen, pocket and outdoor knives ever since, from paring and fillet knives to survival blades he carries camping and hiking. He writes the site’s buying guides, brand reviews and sharpening how-tos to help readers find the right knife for the job. More about Gary.





