A lockback is the lock most people picture when they think of a pocket knife: a spine-mounted bar that drops into a notch on the blade and holds it open until you press the release on the back of the handle. It has no left or right side, it closes with your fingers behind the edge, and it has been trusted for decades on knives like the Buck 110.
My pick is the Buck 110 Folding Hunter if you want the classic, and the Spyderco Delica 4 if you want a lockback you can clip in a pocket and forget.
My Top 7 Lockback Knife Picks
The knife that made the lockback famous, still built in Idaho with brass bolsters and wood. It’s heavy and it rides in a belt sheath, but nothing else here feels quite as solid when it locks open.
A modern back lock you can open with one thumb and clip in any of four positions. The thin, full flat ground blade slices better than most knives in its size.
The Delica scaled up for bigger hands and outdoor jobs. A long, light knife with the same ambidextrous lock and clip.
The 110’s blade and lock in a slim nylon handle with a pocket clip. It’s the version I’d suggest to anyone who loves the 110 but won’t wear a belt sheath.
A short, wide sheepsfoot with Cold Steel’s Tri-Ad lock, a reinforced lockback built to take shocks. Small enough for any pocket, tough enough for a toolbox.
A tidy 3-inch closed lockback from Case’s Bradford, Pennsylvania factory. A good choice for someone who wants a traditional knife that actually locks.
Lockback Knives Compared
| Knife | Blade | Steel | Opening | Weight | Best for |
|---|---|---|---|---|---|
| Buck 110 Folding Hunter | 3.75″ clip point | 420HC | Nail nick, two hands | 7.2 oz | Belt carry, hunting, gifts |
| Spyderco Delica 4 | 2.9″ flat ground | VG-10 | Thumb hole, one hand | Not listed | Daily pocket carry |
| Spyderco Endura 4 | 3.8″ flat ground | VG-10 | Thumb hole, one hand | Not listed | Big hands, outdoor work |
| Buck 110 Slim Select | 3.75″ clip point | 420HC | Thumb stud | 2.8 oz | 110 shape in a pocket |
| Cold Steel Tuff Lite | 2.5″ sheepsfoot | AUS8A | Thumb hole | 2.5 oz | Work, boxes, toolbox |
| Case Caliber Small | Drop point | Stainless | Nail nick | Not listed | Traditional pocket knife |
| Old Timer 31OTCP | 2.9″ drop point | High carbon stainless | Thumb studs | 3.2 oz | First knife, tight budget |
1. Buck 110 Folding Hunter (420HC, Ebony and Brass): Best Overall
Who it’s for: hunters, campers and anyone buying a knife meant to be kept for decades.
When people say “lockback”, this is usually the knife they mean. Buck introduced the 110 in the 1960s and it turned a folding knife into something you could trust on a hunting trip. It still has the same layout: a 3.75-inch clip point in 420HC, ebony scales, brass bolsters and a stout back lock you release with a firm press of the thumb.
What I like most is how simple it is. There’s no clip, no spring assist, nothing to adjust. 420HC is not a glamorous steel, but it’s tough and it sharpens quickly on almost anything, which matters more on a knife used for game and camp chores. Buck’s Forever Warranty covers defects for the life of the knife.
My reservation is weight and carry. At 7.2 ounces with no clip, the 110 belongs in its leather sheath on a belt, and you open it with two hands using the nail nick. It’s a working tool and a great gift, not a modern pocket knife.
Key specs
- Blade: 3.75-inch clip point, 420HC stainless
- Handle: ebony with brass bolsters
- Lock: lockback
- Weight: 7.2 oz; closed 4 7/8 in
- Includes: leather sheath; made in the USA
Pros
- Very solid lock-up
- Easy steel to keep sharp
- Built to last, with a lifetime warranty
Cons
- Heavy for pocket carry, no clip
- Two-handed opening
My verdict: the lockback to buy if you want the real classic and you’ll carry it on a belt. Everyday pocket carriers should look at the Slim Select or the Delica instead.
2. Spyderco Delica 4 Lightweight (VG-10, Black FRN): Best Everyday Carry Lockback
Who it’s for: people who want a light lockback they can open with one hand and carry every day.
The Delica shows what a back lock can do in a modern knife. Spyderco introduced the original in 1990, and the fourth version has a 2.9-inch VG-10 blade, a Round Hole for one-handed opening and a four-position clip, so it carries tip up or tip down on either side. The lock release sits in the middle of the spine, where either hand finds it.
The blade is full flat ground, meaning it tapers from the spine all the way to the edge. That makes it a better slicer than thicker tactical blades of the same length. The fiberglass-reinforced nylon handle has skeletonized steel liners inside, which keeps the knife light without feeling flimsy.
Looks are the catch. The leaf-shaped blade and the big thumb hole are love-or-hate, and the FRN handle is plain. If that doesn’t bother you, this is the lockback I’d tell most people to clip in a pocket.
Key specs
- Blade: 2.90-inch full flat grind, VG-10 stainless, plain edge
- Handle: FRN with skeletonized steel liners
- Lock: back lock
- Overall length: 7.11 in
- Clip: four-position
Pros
- Light and easy to carry
- Slices very well
- Works the same in either hand
Cons
- Odd looks for some buyers
- Plain plastic handle
My verdict: the modern lockback that suits most people. Buy the Endura if your hands are big or your jobs are rough.
3. Spyderco Endura 4 Lightweight (VG-10, FRN): Best Large Lockback
Who it’s for: people with large hands, and anyone who wants a long blade without a heavy knife.
Think of the Endura as a stretched Delica. It has the same idea in every detail: a full flat ground VG-10 blade, a Round Hole, a back lock in the middle of the spine and a four-position clip. The blade grows to 3.8 inches and the knife to 8.7 inches open, which gives a full four-finger grip with room to spare.
I like it for outdoor work where reach helps: breaking down cardboard, cutting rope, food prep at camp. Because the handle is FRN, it stays light for its size, though you’ll notice its length in a front pocket more than the Delica’s.
The trade-off is legal and social rather than practical. A 3.8-inch blade is over the limit in some places and looks more serious than a small knife at the office. Check your local rules before buying.
Key specs
- Blade: 3.8-inch full flat grind, VG-10 stainless, plain edge
- Handle: FRN with skeletonized steel liners
- Lock: back lock
- Overall length: 8.7 in
- Clip: four-position
Pros
- Long blade, light knife
- Fills a big hand
- Ambidextrous lock and clip
Cons
- Blade length is restricted in some areas
- Long in a front pocket
My verdict: the lockback I’d choose for bigger hands and outdoor jobs. For office pockets, stick with the Delica.
4. Buck 110 Slim Select (420HC, Green Nylon): Best Classic Shape, Light Weight
Who it’s for: fans of the Buck 110 who want to carry it in a pocket instead of on a belt.
The Slim Select keeps what makes the 110 good, the 3.75-inch 420HC clip point and the back lock, and drops the brass and wood for a molded nylon handle. The result weighs 2.8 ounces against the original’s 7.2, and it comes with a clip. Buck still makes it in the USA.
That big weight drop changes who the knife is for. The original is a belt knife; this one rides in jeans or work pants and you barely notice it. It’s also a good way to get the 110’s long blade at a much lower cost than the brass version.
My complaint is feel. Nylon scales are practical but they don’t have the warmth or heft that makes the original 110 special, and some owners find the lock stiff at first.
Key specs
- Blade: 3.75-inch clip point, 420HC stainless
- Handle: nylon, with pocket clip
- Lock: lockback
- Weight: 2.8 oz; closed 4 7/8 in
- Made in the USA, Forever Warranty
Pros
- Full-size 110 blade at a fraction of the weight
- Pocket clip
- Made in the USA
Cons
- Plain nylon handle
- Lock can feel stiff when new
My verdict: the most practical way to own a 110. Choose the brass original only if it’ll live on your belt or in a display case.
5. Cold Steel Tuff Lite (AUS8A, Tri-Ad Lock): Strongest Compact Lock
Who it’s for: tradespeople and anyone who needs a small knife that won’t fold on them during rough cuts.
The Tri-Ad is Cold Steel’s reinforced take on the lockback: a stop pin sits between blade tang and lock bar and absorbs the force of a hard cut, so the bar itself isn’t the weak link. It’s one of the strongest common folding locks. On the Tuff Lite it sits in a short 6-inch knife with a 2.5-inch sheepsfoot blade. A sheepsfoot has a straight edge and a rounded-off point, ideal for cardboard, tape and twine, and less likely to stab something by accident.
The blade is wide and hollow ground, and the Griv-Ex handle has a large finger choil so even a small knife gets a secure grip. At 2.5 ounces, it disappears in a pocket or hangs from a lanyard.
It’s not pretty, and the short, stubby blade is no slicer for food. The Tri-Ad is also stiffer to close than a Delica’s lock.
Key specs
- Blade: 2.5-inch sheepsfoot, AUS8A, 2.75 mm thick, hollow ground
- Handle: 3.5-inch Griv-Ex
- Lock: Tri-Ad
- Weight: 2.5 oz; overall 6 in
Pros
- Very strong lock for the size
- Great shape for boxes and packaging
- Secure grip on a small handle
Cons
- Poor for food and slicing
- Lock is stiff to release
My verdict: the small work lockback I’d put in a toolbox or a work jacket. For general carry, the Delica is more versatile.
6. Case Caliber Small Lockback (Stainless, Made in USA): Best Small Traditional
Who it’s for: people who want a traditional American pocket knife that locks, in a size that fits a watch pocket.
Many Case patterns are slipjoints, which have no lock at all; the blade is held by spring tension. The Caliber lockback is the exception for buyers who like the Case look but want a blade that won’t close on their fingers. It measures 3 inches closed, carries a stainless drop point blade and is made in Bradford, Pennsylvania.
I like it as a gift or a first traditional knife. It’s small enough for dress pants and simple to maintain: stainless steel resists rust, and the drop point is easy to sharpen.
The downsides are traditional ones. There’s no clip and you open it with the nail nick, so it’s slower than the Delica or Old Timer. Case’s limited lifetime warranty covers defects only.
Key specs
- Blade: drop point, stainless steel
- Handle: lightweight synthetic
- Lock: lockback
- Closed length: 3 in
- Made in Bradford, PA, USA; limited lifetime warranty
Pros
- Small and discreet
- Locks, unlike most traditional patterns
- American made
Cons
- No clip
- Two-handed opening
My verdict: a neat small lockback for traditional knife fans. If you want one-handed opening, the Old Timer does that for less.
7. Old Timer 31OTCP Medium Lockback (Wood Handle, Clip): Best Budget
Who it’s for: beginners and anyone who wants the traditional lockback look with modern one-hand opening.
The 31OTCP mixes old and new. It has the wood handle and nickel silver bolsters of a traditional knife, but adds ambidextrous thumb studs and a pocket clip. The 2.9-inch drop point blade is a sensible all-round size, and at 3.2 ounces it carries easily.
Old Timer today is a budget brand, not the American maker it once was, so judge it on value. For very little money you get a usable lockback that looks better than most cheap knives. It’s the knife I’d hand a teenager learning to carry one.
The steel is basic high carbon stainless, and factory edges and fit can vary from knife to knife. Expect to sharpen it before serious use.
Key specs
- Blade: 2.9-inch drop point, high carbon stainless steel
- Handle: wood with nickel silver pins and bolsters
- Lock: lockback; thumb studs on both sides
- Weight: 3.2 oz; overall 6.5 in
- Lifetime warranty
Pros
- Costs very little
- One-handed opening plus a clip
- Traditional look
Cons
- Basic steel
- Fit and edge vary
My verdict: the cheapest lockback I’d recommend. Spend more on the Delica if this will be your only daily knife.
How I’d Pick a Lockback
Decide between belt and pocket
Belt or pocket is the first choice because it decides the whole style of knife. Traditional lockbacks like the Buck 110 have no clip and ride in a sheath; modern ones like the Delica clip into a pocket. If you won’t wear a sheath, skip the brass-and-wood classics.
Check how it opens
Opening method matters as much as the lock. A nail nick needs two hands, while thumb holes and thumb studs open with one. If you’ll use the knife while holding something in your other hand, buy a one-hand opener.
Look at the release position
The release on a lockback sits on the spine, and its position changes how the knife feels. A release near the middle (Spyderco) is easy to reach without shifting your grip. One set toward the rear of the handle (Buck, Case) can be pressed by accident if you squeeze hard during heavy cuts, so keep your palm off it.
Pick the blade length for where you live
Blade length should fit both your jobs and your local rules. About 3 inches handles most daily tasks; 3.75 inches and up is better for hunting and camp work but is restricted in some areas. If you need something smaller for an office or strict rules, my best EDC knife under $100 guide has short-bladed options.
Don’t overthink the steel
For a lockback, steel is a smaller decision than shape and carry. 420HC and AUS8A are easy to sharpen; VG-10 holds an edge longer. My carbon vs stainless steel guide covers the basics if you’re choosing between steel types.
Lockback vs Liner Lock and Other Locks
A lockback is ambidextrous and keeps your fingers behind the edge while closing, which is why it’s a good lock for beginners. A liner lock is slimmer and cheaper but usually favors right-handers, and you close it by pushing a thin bar with your thumb in the blade’s path. Newer locks like the Benchmade AXIS or button locks are smoother to operate one-handed. My folding knife lock types guide explains how each one works and how to close it safely.
The weak point of a lockback is wear. Over years of use, the notch and bar can develop a little vertical play (blade wobble). Most good makers fix this under warranty. My guide on how to fix a pocket knife covers what you can do at home.
FAQ
What is a lockback knife?
A lockback knife is a folding knife with a locking bar along the back of the handle. When the blade opens, the bar drops into a notch on the blade and holds it. You close it by pressing the release on the spine.
Are lockback knives strong?
Yes, a well-made lockback is strong enough for any normal pocket knife job. Reinforced versions like Cold Steel’s Tri-Ad are among the strongest folding locks. Cheap lockbacks with soft parts can develop play over time.
Are lockback knives good for left-handed people?
Yes, lockbacks are one of the best locks for left-handers because the release is on the spine, not on one side. Check the clip too: the Spyderco models here have clips that move to either side.
How do you close a lockback knife?
Press the release on the back of the handle, then fold the blade closed with your fingers kept behind the edge. Release the pressure once the blade has started to move. Stiff new locks loosen up with use.
Is the Buck 110 a good pocket knife?
The Buck 110 is a great knife but not a great pocket knife. At 7.2 ounces with no clip, it’s made for a belt sheath. The Buck 110 Slim Select is the version for pocket carry.
Which is better, a lockback or a liner lock?
A lockback is better for left-handers and beginners, since it works from either side and closes with fingers out of the way. A liner lock is slimmer and smoother for right-handers. Both are safe when well made.
Final Verdict
The Buck 110 Folding Hunter is still the lockback against which the others are measured, as long as you’ll carry it on a belt. For a pocket, the Spyderco Delica 4 is the one I’d choose, with the Endura 4 for bigger hands. On a tight budget, the Old Timer 31OTCP gives you a clip and one-hand opening for very little.
Want more choice of lock? My best folding knife under $100 guide mixes back locks with other types, and my backpacking knives guide covers light knives for the trail.

Gary Portman founded knivesadvice.com in 2019. He learned to cook in his family’s kitchen as a kid and has used kitchen, pocket and outdoor knives ever since, from paring and fillet knives to survival blades he carries camping and hiking. He writes the site’s buying guides, brand reviews and sharpening how-tos to help readers find the right knife for the job. More about Gary.






